Closest Location:
Portland
Open:
8:00AM-6:00PM
PARKROSE HARDWARE
ZAR 30941
ZAR® wood patch is a latex compound that both contractors and savvy do-it-yourselfers rely on to fill nail holes and repair cracks, gouges, broken corners and chipped edges on wood surfaces. It's excellent for a variety of uses because it only shrinks a little and can be nailed, sawed, sanded or drilled. ZAR® wood patch can be used indoors or outdoors and accepts paint, varnish, shellac, polyurethanes and stains. In fact, it actually accepts stain more readily than conventional wood patching compounds.
| Application Method | : | Putty Knife, Trowel |
| Boiling Point | : | 100 deg C |
| Compositions | : | Limestone, Mica, Stoddard Solvent, Raw Umber, Iron Oxide |
| Coverage Area | : | 56 cu-in/qt |
| Density | : | 14.7 lb/gal |
| Drying Time | : | 1.5 to 2 hr |
| Flash Point | : | 5001 deg C |
| Odor/Scent | : | Amine |
| Shelf Life | : | 3 years |
| Specific Gravity | : | 1.8 |
| Temperature Rating | : | <40 deg F |
| VOC Content | : | 49 g/L |
| pH Range | : | 9 |
| Form | : | Paste |
- Repairs nail holes, cracks, gouges and minor blemishes on wood surfaces
- Accepts stain uniformly
- Greatly diminishes the lighter area or "Halo" effect surrounding the patch when patch requires a wood stain
- May be sanded, sawed or drilled
- Tintable
Specification Sheet