mohawk finishing products m647-1105 waterborne bubble breaker, liquid, 1 pt

Mohawk waterborne bubble breaker is an additive for the waterborne pre-catalyzed lacquer, waterborne wood tone sealer and waterborne conversion varnish. Bubble breaker will eliminate small bubbles that could appear on the finished surface when spraying at high-temperatures and high-humidity. Begin by adding bubble breaker at 1 oz/gal. Do not exceed 3 oz/gal. Electric drill mixing equipment is preferred. If electric equipment is not available, mix very well for at least 3 to 4 min. If bubble breaker is not incorporated well, fisheyes may appear. If this happens, simply continue to mix the product with the Bubble Breaker addition aggressively for another 3 to 4 min.

• Zero VOC
• Water clean-up
• Contains no lead or formaldehyde
• Use with any Mohawk waterborne sealer or top-coat

• SDS https://assets.unilogcorp.com/187/ITEM/DOC/Mohawk_Finishing_Products_103522042_SDS.pdf
• Specification Sheet https://assets.unilogcorp.com/187/ITEM/DOC/Mohawk_Finishing_Products_103522042_Specification_Sheet.pdf