Closest Location:
Portland
Open:
8:00AM-6:00PM
PARKROSE HARDWARE
SYSTEM THREE 90201
RotFix is an easy to use, low viscosity epoxy wood sealer, primer and consolidant for repair and restoration of rotted, deteriorated, dried out or spongy wood. RotFix is a component of The EndRot system. It creates a sound, waterproof base for repair and restoration filler putty. With this bottle you can accurately measure, mix and apply RotFix in batches from 2 to 7 oz.
| Color | : | Clear (Part-A), Orange/Red (Part-B) |
| Compositions | : | Alkyl Glycidyl Ether, Benzyl Alcohol, Diglycidyl Ether of Bisphenol A, Diglycidyl Ether of Bisphenol F (Part-A), Modified Polyethylene Polyamine Adduct, Reaction Products Of TETA with Phenol/Formaldehyde, Benzyl Alcohol, Triethylenetetramine (TETA), Phenol, Diethylenetriamine, Tetraethylenepentamine, 4, 4'-Isopropylidenediphenol (Part-B) |
| Curing Time | : | 72 hr |
| Density | : | 9.31 lb/gal (Part-A), 0.97 (Part-B) |
| Media | : | Alcohol-Resistant Foam, Carbon Dioxide (CO2), Dry Chemical, Water Fog (part-A), Alcohol-Resistant Foam, Carbon Dioxide (CO2), Dry Chemical, Dry Sand, Limestone Powder (Part-B) |
| Odor/Scent | : | Amine |
| Resin Type | : | Epoxy |
| Specific Gravity | : | 1.1 to 1.2 (Part-A) |
| Temperature Rating | : | 35 deg F |
| Viscosity | : | 150 to 200 cPs (Part-A), 300 to 400 cPs (Part-B) |
| Form | : | Liquid |
- 100% solids formulation is low-odor and solvent-free
- Flows like water for superior penetration into wood and most porous materials
- Two part system features an easy 2:1 mixing ratio
- Apply by pouring or brush
- Reliably cures at temperatures as low as 35 deg F
- Can be used on damp wood
- Use to harden soft, punky, wood as a base for further repair
- Seals wood permanently to prevent future moisture penetration
Catalog