Closest Location:
Portland
Open:
Saturday
7:00AM-8:00PM
PARKROSE HARDWARE
Drylok 27513
Latex Base DRYLOK® Masonry waterproofer is the manageable way to solve water seepage problems. Reduces radon gas penetration by reducing vapor transfer.
| Applicable Materials | : | Acrylic, Cement, Latex Alkyd, Oil Base, Polyvinyl |
| Application Method | : | Brush, Roller, Spray |
| Application Temperature | : | 50 deg F |
| Base Type | : | Latex |
| Boiling Point | : | 100 deg C |
| Color | : | White |
| Compositions | : | Quartz, Limestone, Mica, Diethylene Glycol Monomethyl Ether, Titanium Dioxide |
| Coverage Area | : | 75 to 100 sq-ft/gal |
| Density | : | 12.7 to 12.8 lb/gal |
| Drying Time | : | 2 to 3 hr, 30 min Touch, 3 hr Recoat |
| Flash Point | : | 5001 deg C |
| Form | : | Liquid |
| Odor/Scent | : | Ammonia |
| Package Size | : | 1 gal |
| Package Type | : | Pail |
| Resists | : | Hydrostatic Pressure, Wind Driven Rain |
| Specific Gravity | : | 1.5 |
| VOC Content | : | <100 g/L |
| Viscosity | : | 110 to 120 ku |
| pH Range | : | 9.5 to 9.9 |
- Guaranteed to stop water
- Helps protect against radon gas penetration by reducing vapor transfer
- Low-odor formula complies with all current VOC requirements
- Breathable film will not trap moisture in the masonry
- Easy cleanup with warm, soapy water
- Four Ready-mixed, flat finish colors
- No pre-mixing or pre-wetting
- DRYLOK® latex base masonry waterproofer may be top coated with a good quality latex paint for decorative purposes
SDS