Closest Location:
Portland
Open:
7:00AM-8:00PM
PARKROSE HARDWARE
PROTECTIVE COATING 72561
PC-CONCRETE™ anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hrs at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE™ is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE™ is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
| Compositions | : | Diglycidy Ether of Bisphenol A, Trimethylolethane Triglycidy Ether, Non Hazardous Proprietary Ingredients, Ethylene Glycol, Titanium Dioxide, Silica, Quartz |
| Flammability Rating | : | 1 |
| Flash Point | : | >300 deg F |
| Includes | : | (2) Nozzles |
| Odor/Scent | : | Slight |
| Specific Gravity | : | 1.4 |
| Temperature Rating | : | 35 to 115 deg F |
| Type | : | 2-Part |
| VOC Content | : | 7.84 g/L |
| pH Range | : | 2 to 12 |
| Color | : | White |
| Form | : | Paste |
- Anchor into marine docks above or below water line
- Bond to pre-stressed floors
- Waterproof floor to wall cracks
- Seal crack in sanitation and chemical storage facility containment area
- Anchor-safe to floor prison and security pick-proof epoxy
- Repair floor in fire station garage
SDS